Stock jetting on Grizzly 660
Jul 13, 2003 | 04:07 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Aug 2002
Posts: 13
Likes: 0
Stock jetting on Grizzly 660
I would like to know what the stock jetting is for a 2002 Grizzly 660.
1. What is the pilot jet #?
2. What is the main jet #?
3. What is needle clip position?
4. How many turns out on air screw?
Currently, my machine is set up for an altitude of 8000-10000ft. I will be heading east where it is closer to sea level so I would like to set it back to stock. Thanks in advance for any replies.
1. What is the pilot jet #?
2. What is the main jet #?
3. What is needle clip position?
4. How many turns out on air screw?
Currently, my machine is set up for an altitude of 8000-10000ft. I will be heading east where it is closer to sea level so I would like to set it back to stock. Thanks in advance for any replies.
Thread
Thread Starter
Forum
Replies
Last Post
OutRacing
Technical and How-To Articles
5
Sep 3, 2015 07:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
