can sumone tell me how to tightin it

 

Get a huge wrench (pipe wrench or gargantuan adjustable) and righty tighty. Its easy to have some one hold the rear brake on while u do it. Just tighten the inside one first then the outside one second.

-Nick-

 

okay i loosened the first nut .............any triks for the second one it doesn't wanna g0[img]i/expressions/face-icon-small-sad.gif[/img]

 

???[img]i/expressions/face-icon-small-confused.gif[/img]

 

What are you trying to do, just tighten up the axle? The manual shows the two nuts on the axle. You're going to have to hold the inner nut while tightening the outer nut. It's calling for 140 ft.-lb. of torque, which is quite a bit. The manual also shows a special tool fixture to tighten these nuts, but I would assume that a pair of thin wrenches will work. You could try a pair of big adjustable wrenches, but you probably won't be able to get enough torque on them.

Does this help?

 

the second nut doesn't wanna get loose even with the bike in gear brakes pressed and someone sitting on it nut still won't loosen wtf?