I WAS WONDERING WHETHER OR NOT TO PUT A 690 KIT FROM CURTIS SPARKS ON MY 03 RAPTOR I ALREADY GOT A SPARKS PIPE BUT I WANT TO GET EVEN MORE POWER ANY SUGGESTIONS?[img]i/expressions/face-icon-small-confused.gif[/img]

 

 

JUS2COOL2K....welcome too the forums. Moved this thread too the Yammi forum. On the topic, you can add a 10.75/1 JE and a Stage 1 Hot Cam /w with a top end gasket set for under $350. THis is a nice gain....I compare the difference too piping and properly jetting a stock Raptor. Later.

 

I would suggest bypassing the stage one cam..........I really disliked mine.....
for 400 big ones you can have a
piston
cam
springs
and gaskets.......
that is my suggestion!!!!!!!

 

Awe, just take it in to Curtis and have it done right, but spend the extra money and get a aftermarket Rod, just take it from me I have had the experience.

 

i would take it to craycraft racing and you want have to wait a year

 

True, True.

Do you live close to Bakersfield?

 

NO, I LIVE IN LOS ANGELES

 

Thats close enough, just drive it over there and drop it off. Tell him you will be back in two weeks............ Hey, you might get lucky!!! [img]i/expressions/face-icon-small-wink.gif[/img]

 

Getting a 690 from Curtis Sparks will take forever, litterally! I saw look into all the other builders like Trinity, LRD, Craycraft, Powroll, and any local shop in your area could do that type of work.