MY warrior frame has 2 dents on the bottom of the frame. i was wondering if these dents bent the frame.i don't think they did bend the frame.also, do many people dent their frames on the bottom or don't many people. i was just wondering if other people get their frame bent also.

 

If you ride in very rocky terrain without a-arm guards, a full glide plate, and swingarm skid plate, you will eventually ding the frame. I had a couple dents on the bottom of the frame before I wised up and put on the full glide plate. Unless the tube is caved in, I doubt the damage to the frame geometry is anything more than a local ding. I also hit a wash very fast on my warrior and split the frame in about 5 different spots. Cost quite a bit to take off all the plastic and motor to do a 360 degree weld repair on the tubes.