No unless the blaster has every single part modded on the market like big bore 240kit, bigger carb,k&N filter,v force reed valve,tommey complete pipe,reed spacer,clutch barnett,boost bottle,porting
A stock blaster keep up with 4x4 like rubicon kodiak with a 240 maybe it will be equal or less to the 400ex but to smoke a 400ex need a LOT of mods

 

i doubt it.

 

Hollywood dirt makes a 240 kit that comes FULLY race ported. Combine that with a 33mm, and a few other light mods, pipe, filter, and reeds and that 400 will go home crying. guaranteed

 

you'll keep up with a stock shee no problem

 

how much does the kit cost ??

 

I believe around 550? It comes with eveything you need. Its the only 240 kit that comes ported and they do some other mod to the pots that is there own kind of custom thing i think. But it ends up being real fast. They will riffle the exhaust and intake ports to increase flow.
From what I hear about it a blaster all done up with that kit and other light mods like i said can easily take lightly modded 400exs, and spank stock banshees.

Check them out at http://www.hollywooddirtproductions.com/

 

are u an idiot DDrraagracer u can still keep up with a 400ex with a stock blaster i mean theres still a pretty decent gap but there is no way it could keep up with a hollywood dirt 240...... keep up with a rubicon or kodiak thats about the dumbest thing iv ever heard ..... just dont talk

 

when did the rubicon and kodiak come into play?


its posts like that that bring discussions to a flame war.

 

No unless the blaster has every single part modded on the market like big bore 240kit, bigger carb,k&N filter,v force reed valve,tommey complete pipe,reed spacer,clutch barnett,boost bottle,porting
A stock blaster keep up with 4x4 like rubicon kodiak with a 240 maybe it will be equal or less to the 400ex but to smoke a 400ex need a LOT of mods[/quote]

Thats when they came into play.

 

i dont have a video so the best i can do is give u my word... i have beat quite a few 400s... but it takes more then a 240 and a pipe... u need a carb, porting, filter, blah blah blah... but it is very possible...