Hey guys i have a 2000 Blaster and off and on it will start to leak fuel out of what I think is the bowl vent, and when I say leak i mean pour, alot of gas comes out, but if you start it and run it or mess with it, it will stop for a while then after say 10 min of riding i notice it's leakin again. Is this the needle and seat not sealing or what?
THanks for the help!

 

I would guess that the float is sticking or adjusted too high.

 

Or it could be the needle and seat, either dirty or worn.

 

I think the float is sticking too, my banshee does that after im flat out of gas and i fill it up, i just turn the gas off, then turn it back on and it quits. I also heard flicking the carb will make it get unstuck.

 

mine did that too so i bought a carb kit and it fixed the problem

 

Floats stuck

 

exactly, dirty or worn out

 

Its the float, had the same problem from dropping it out of my truck when unloading it.