Does anyone have any exsperience with this cam?

 

I believe sparks uses it as thier high end cam.

 

yea that is the one they used,Bob compared the 2 and they are the same cam,we will be making sure once we recieve the 2 side by side,the paper specs show all the same lift and designs.

 

1bad, are you gonna use this cam?

 

If they pan out to be the same then yes,if no then sparks hi rev...

 

On both the Sparks and MegaCycle web site's they are within a Few dollers of each other. Do you know if you are going to have to fly cut the piston for this cam or not?

 

I believe the piston will be fine,I will talk to bob and ask again and let you know for sure..

 

What pistons are you guys running with this cam? Also have you done anything to the valves i.e. bigger valves? I wanted to put one of the high rev cams in my raptor with 12:1 105 je piston, and was wondering if I would have to modify the valve reliefs for clearance????

 

I went 1mm over and had some valve work done at the same time.. not sure what the whole job consist of..

 

So with the +1mm valves will you have any clearance issues with the piston hitting on the valves?