Yamaha Discussions about Yamaha ATVs.

Turbo for a blaster ???

Old Apr 15, 2004 | 12:30 AM
  #11  
wanaply21's Avatar
Pro Rider
Joined: Feb 2004
Posts: 432
Likes: 0
Default Turbo for a blaster ???

yo ttrain just leave, everytime u post u make urself look like an idiot, if ud like to save urself of more humiliation thats what i suggest
 
Reply
Old Apr 15, 2004 | 12:32 AM
  #12  
stevendsm95gst's Avatar
Pro Rider
Joined: May 2003
Posts: 848
Likes: 0
Default Turbo for a blaster ???

That wasnt very nice of you to say that to me. You find that article for me in dirtwheels buddy.

Then go ahead and do a search here on these forums for blaster and turbo and you will find my post about that paticular turbo. I would be suprised if dirtwheels even knew where to get a Te04h
 
Reply
Old Apr 15, 2004 | 12:45 AM
  #13  
AngryHampster's Avatar
Pro Rider
Joined: Jan 2004
Posts: 560
Likes: 0
Default Turbo for a blaster ???

turboing a blaster = waste of time and money.


Even with a really really small turbo it wouldnt spool till about 7000RPM's...and that would just be retarded.



oh, and tTrain, it does't matter what you read, its whether or not you understood what you read, in this case, i doubt you did.
 
Reply
Old Apr 15, 2004 | 12:49 AM
  #14  
wanaply21's Avatar
Pro Rider
Joined: Feb 2004
Posts: 432
Likes: 0
Default Turbo for a blaster ???

i thougt u could set a turbo to spool at a lower rpm
 
Reply
Old Apr 15, 2004 | 01:09 AM
  #15  
Outlawlawndragster's Avatar
Pro Rider
Joined: Aug 2003
Posts: 516
Likes: 0
Default Turbo for a blaster ???

Depends on the turbine and pitch . Some of the variable vein turbos spool up quick . But dont waste your money on a blaster SUPERMOD if you want to spend money and go fast buy a Polaris RMK 800 crate motor there about 2700 add clutches and you have a 140HP ATV .
Or if you just want something exotic build a pulse jet and set it into the frame of the Blaster . You would be the hit of the Neiborhood with a pulse jet .
They scream out at 155 Decibels at full on
 
Reply
Old Apr 15, 2004 | 03:11 AM
  #16  
BeerSmurf's Avatar
Pro Rider
Joined: Sep 2003
Posts: 204
Likes: 0
Default Turbo for a blaster ???

Turbo on a single cylinder loop scavenge two stroke is somewhat problematic to start with.

A Blaster is probably an especially poor choice for a turbo installation.
You can easily make more power and heat than the engine can take with conventional mods, pipe, porting, carb etc.
Adding manifold pressure to the mix is probably not going to cause anything but grief.

I think you might be able to do some good with some kind of turbo long rod Banshee motor converted to thru scavenge with a poppet valve top end.
At that point you are really talking exotic, hybrid type stuff.
If you want to write the check, I'd love to see it built.
 
Reply
Old Apr 15, 2004 | 10:51 AM
  #17  
Shav0's Avatar
Pro Rider
Joined: Jan 2004
Posts: 2,489
Likes: 0
Default Turbo for a blaster ???

Ttrain you should post more often. I always look forward to getting up in the morning and seeing what you have to say, it cracks me up every time. Keep em comin'

lol
 
Reply
Old Apr 15, 2004 | 12:36 PM
  #18  
THEXOTIC1's Avatar
Pro Rider
Joined: Sep 1999
Posts: 906
Likes: 1
Default Turbo for a blaster ???

WHY!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!


Waste of money You should think about brakes first. Those blasters dont stop for nothing unless you have a new one with the hydrolic brakes
 
Reply
Old Apr 15, 2004 | 02:23 PM
  #19  
Knutz99's Avatar
Trailblazer
Joined: Jul 2003
Posts: 58
Likes: 0
Default Turbo for a blaster ???

just get a shee
 
Reply
Old Apr 29, 2004 | 06:01 AM
  #20  
GIMPED's Avatar
Trailblazer
Joined: Apr 2004
Posts: 39
Likes: 0
Default Turbo for a blaster ???

HEY TTRAIN........JUST ASK YOUR DADDY WHEN HE WAKES UP. HE HAS ALL THE ANSWERS IM SURE
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:14 PM.