banshee carb jetting
#1
banshee carb jetting
i was looking for some help trying to buy the right jets for a 98 banshee with stock carbs. with a 60 over bore cylinders. there are 280 mains and i think 25 pilots. it seems to be lagging top and bottom. i pulled the plugs out and notice it was burning rich. the plugs were driping wet. just trying to avoid doing the famous buy three up and three down and compare and contrast. thanks don
#2
#3
banshee carb jetting
go here and read this is all you should ever wanna know about jetting a banshee it is sponsered by benbb at bansheehq.com check it out!!
http://www.dfn.com/benkaren/jetfaq.html
http://www.dfn.com/benkaren/jetfaq.html
#5
banshee carb jetting
Its impossible to tell if you are rich or lein without knowing your altitude, air temp., air screw setting, needle clip position and all the other variables. if your plugs are wet then you are obviously rich but you dont know where the richness is comming from It could be your main, needle clip, or pilot position. a lein condition in one area could be masked by a rich condition in another...
Thread
Thread Starter
Forum
Replies
Last Post
bpegram84
Kids Quads & Other ATV's - Ask an Expert!
0
07-22-2015 08:15 AM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-07-2015 11:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)