Yamaha Discussions about Yamaha ATVs.

VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Thread Tools
 
Search this Thread
 
Old Jun 1, 2004 | 01:54 AM
  #81  
14mins's Avatar
Elite Pro Rider
Joined: Aug 2000
Posts: 6,549
Likes: 0
Default VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Sparkx- I must have missed where kens was running stock carbs, I thought i read they were 35mm FCR's.

Just bolting on bigger carbs is not always the answer. I have modded stock carbs on my 686 that made more power than any 727 at FSW2. putting 39mm FCR's on a built trinty 727 will be bad. lmao
 
Reply
Old Jun 1, 2004 | 02:26 AM
  #82  
RAPTORAZ's Avatar
Pro Rider
Joined: Dec 2000
Posts: 1,407
Likes: 0
Default VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Originally posted by: 14mins
Raptoraz- You are being to negative. As far as relibility of your 727 goes..... If you are down on power it ought to stay together longer[img]i/expressions/face-icon-small-wink.gif[/img]

I'd put money on my bike out dynoing 99% of all other stock carbureted Raptor's out there.


 
Reply
Old Jun 1, 2004 | 04:30 AM
  #83  
14mins's Avatar
Elite Pro Rider
Joined: Aug 2000
Posts: 6,549
Likes: 0
Default VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Raptoraz- That is a tall order for someone that posted yesterday that you were broke. LOL 99 out of 100 would be fantastic. I would think with real money some guys would pull there 35mm and 39mm fcr's off and see about collecting some. Then there is the group of built raptors that have been running with modded stock carbs for a long time out there that would take a stab at it.

Just bolting on a set of FCR's does not automaticlly jump the hp 5 to 10 more, in fact i run across a lot of guys with poorly tuned FCR's losing HP until they finally get them sorted out

Text
RAPTORAZ
Pro Rider
GLENDALE, Arizona

Posts: 863
Joined: Dec 2000



Tue June 01, 2004 12:26 AM




Quote

--------------------------------------------------------------------------------
Originally posted by: 14mins
Raptoraz- You are being to negative. As far as relibility of your 727 goes..... If you are down on power it ought to stay together longer
--------------------------------------------------------------------------------




I'd put money on my bike out dynoing 99% of all other stock carbureted Raptor's out there.




 
Reply
Old Jun 1, 2004 | 09:37 AM
  #84  
RAPTORAZ's Avatar
Pro Rider
Joined: Dec 2000
Posts: 1,407
Likes: 0
Default VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Originally posted by: 14mins
Raptoraz- That is a tall order for someone that posted yesterday that you were broke. LOL 99 out of 100 would be fantastic. I would think with real money some guys would pull there 35mm and 39mm fcr's off and see about collecting some. Then there is the group of built raptors that have been running with modded stock carbs for a long time out there that would take a stab at it.

Whenever you're ready. Bring them here. Or to Glamis. Oops, I forgot, you're afraid of hills.

 
Reply
Old Jun 1, 2004 | 11:42 AM
  #85  
14mins's Avatar
Elite Pro Rider
Joined: Aug 2000
Posts: 6,549
Likes: 0
Default VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Not worth the trip. We have comparable trinity's around here. Maybe i have read wrong, i thought you were similiar to the kens that got smoked at the cinders? 727, over size valves, porting, 105mm hi comp piston?

I have been to Glamis twice, actually raced olds hill on the Thanksgiving before FSW. Did real well until the nasty tumble. [img]i/expressions/face-icon-small-blush.gif[/img] Added a longer swinger since then, afraid no more. lol
 
Reply
Old Jun 1, 2004 | 09:16 PM
  #86  
RAPTORAZ's Avatar
Pro Rider
Joined: Dec 2000
Posts: 1,407
Likes: 0
Default VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Originally posted by: 14mins
Not worth the trip.
Is it that it's not worth the trip, or is it that you have made so many enemies through your various trash talking endeavours that you are too afraid to go to Glamis?

 
Reply
Old Jun 1, 2004 | 09:19 PM
  #87  
RAPTORAZ's Avatar
Pro Rider
Joined: Dec 2000
Posts: 1,407
Likes: 0
Default VIDEOS!!! Craycraft vs. Kenz vs. Sparks

Originally posted by: 14mins
Not worth the trip. We have comparable trinity's around here. Maybe i have read wrong, i thought you were similiar to the kens that got smoked at the cinders? 727, over size valves, porting, 105mm hi comp piston?
Mines very similar. However mine has no problems running with the SPARKS bike in question(even with my stock carbs and 50+lbs more weight). As previous videos have confirmed. Too bad you can't say the same. Since you were too afraid to show up on MLK weekend.

 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeepwheelin02
1) Engine problems..
5
Jul 18, 2020 06:42 PM
HondaR24
ATV Videos
6
Jul 16, 2015 10:45 AM
ATVC Correspondent
ATV Videos
2
Jul 16, 2015 03:13 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 04:13 PM.