Yamaha Discussions about Yamaha ATVs.

Bent Rear Axl - 01' Kodiak 400

Thread Tools
 
Search this Thread
 
Old May 30, 2004 | 02:08 PM
  #1  
srm's Avatar
srm
Thread Starter
|
Weekend Warrior
Joined: May 2004
Posts: 1
Likes: 0
Default Bent Rear Axl - 01' Kodiak 400

G'day All. I recently purchased a second hand 2001 Kodiak 400 from a friend. The past two weeks i went away with some friends for an ATV trip in the woods. I noticed that my back wheel is wobbly a bit. After some investigation it is the actual axl bar/shaft that is a bit 'off'. it's only off a tiny bit, and can only really notice it when i drive on flat surface. My question(s) are,

1.) Can i just leave this? will it cause more damage?
2.) What kind of cost would i be looking at to repair?
3.) can the existing bar be fixed or does it need to be replaced?

Thanks in advance
-srm
 
Reply
Old May 30, 2004 | 05:21 PM
  #2  
ignoranceking14's Avatar
Trailblazer
Joined: Jul 2003
Posts: 87
Likes: 0
Default Bent Rear Axl - 01' Kodiak 400

th only damage this will cause is that itll prematurely wear ure rears tire(s).rear axle replacement will cost in upwards of 200 smackers,so if it aint too bad i dunno if its necessary to replace it,it may also affect handling,but only th slightest bit if as u sed,its only a little bend.my younger brother ran his arctic cat into a tree earlier this week,but it only bent th a arm so th tire tilts in a bit on the front left side,its still dirveable,but the tire wear is gonna be an issue.it just depends on if u wanna spend ure money replacing tires,or replacing th axle.hope this helps.
 
Reply
Old Jun 1, 2004 | 08:00 AM
  #3  
atv123's Avatar
Pro Rider
Joined: Aug 2003
Posts: 310
Likes: 0
Default Bent Rear Axl - 01' Kodiak 400

Tire wear is the only thing I can think of it affecting, well and maybe the handling a little. If you don't ride on hard flat surfaces much, I'd just leave it be. Not sure how much a new one would set you back.
 
Reply
Old Jun 1, 2004 | 11:03 AM
  #4  
FastbansheeandKodiak's Avatar
Range Rover
Joined: Jan 2004
Posts: 192
Likes: 0
Default Bent Rear Axl - 01' Kodiak 400

I also bent axle of my kodiak a year ago and when i went into the dealer about it they said that it wasnt a problem and that they could straighten it for me[img]i/expressions/face-icon-small-smile.gif[/img] they also said that most dealers or shops could have also done it so i would ask around if i were you. And i have had no other problems after that and it seems really strong still, and mine was bent good, and it only cost me 25 bucks.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
merryman
Yamaha
15
Sep 6, 2015 10:20 AM
bigred20653
Honda
20
Aug 31, 2015 12:41 PM
DFWSRT8
Suzuki
6
Aug 20, 2015 09:24 AM
ATVC Correspondent
Yamaha
1
Jul 28, 2015 12:12 PM
RedRancher
Yamaha
10
Jul 10, 2015 06:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:16 AM.