Yamaha Discussions about Yamaha ATVs.

banshee cutting out

Thread Tools
 
Search this Thread
 
  #1  
Old 06-01-2004 | 12:36 AM
alf's Avatar
alf
Thread Starter
|
Trailblazer
Joined: Mar 2004
Posts: 39
Likes: 0
Default banshee probs

when i get into it over 1/2 throttle or in the powerband it studders and breaks up. it dosent bogg just has no power and has no top speed. is it my jetting or something else like spark the plugs look good alittle rich but ok
 
  #2  
Old 06-01-2004 | 04:36 PM
alf's Avatar
alf
Thread Starter
|
Trailblazer
Joined: Mar 2004
Posts: 39
Likes: 0
Default banshee probs

anyone?
 
  #3  
Old 06-01-2004 | 05:02 PM
Hiram's Avatar
Pro Rider
Joined: Oct 2002
Posts: 777
Likes: 0
Default banshee cutting out

Go one size smaller on the main jets and see if that makes it better? The stator has also been known to do funny things like what you are mentioning, but I'm not 100% sure on just how to test it. It going to be either fuel or electrical.
 
  #4  
Old 06-01-2004 | 05:09 PM
Hiram's Avatar
Pro Rider
Joined: Oct 2002
Posts: 777
Likes: 0
Default banshee cutting out

One more thing I forgot and is very important, what is your compression reading in each cylinder? Get a guage and with the throttle pinned and the switch in the off positon give it 12-15 good kicks or until the reading doesn't get any higher and tell me what the number is
 
  #5  
Old 06-02-2004 | 01:06 AM
alf's Avatar
alf
Thread Starter
|
Trailblazer
Joined: Mar 2004
Posts: 39
Likes: 0
Default banshee cutting out

I WENT DOWN ONE ON THE MAIN GONNA TRY THAT IN THE MORNING, AND CHECK MY COMPRESION, AND IF THAT IS GOOD AND STILL NOT WORKING WERE GONNA PUT ON MY FRIENDS STATOR AND FLYWHEEL
 
  #6  
Old 06-02-2004 | 10:14 AM
Hiram's Avatar
Pro Rider
Joined: Oct 2002
Posts: 777
Likes: 0
Default banshee cutting out

Your compression should be somewhere near 160psi,
How did the stator/flywheel swap work?
 
  #7  
Old 06-02-2004 | 02:02 PM
alf's Avatar
alf
Thread Starter
|
Trailblazer
Joined: Mar 2004
Posts: 39
Likes: 0
Default banshee cutting out

put the 350 main in and there was no change. gonna due the stator tonight when he gets off work
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Beeline08
Yamaha
3
11-11-2016 04:00 PM
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Bernhard
Yamaha
1
09-25-2015 12:45 PM
Nosniborpapa
Kawasaki
4
09-19-2015 07:07 PM
Elkaholic
Land, Trail and Environmental Issues
1
09-06-2015 02:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: banshee cutting out



All times are GMT -5. The time now is 12:01 PM.