trinity racing banshee engines
#2
trinity racing banshee engines
Nearly any builder can build a cheetah motor.From what I know,Trinity doesn't actually make the cylinders,they get them and do the port work.I think they are made by Calvin Pollet Industries.This is not the same as CPI Pipes BTW.I'd get someone else to port them for ya.I don't really want to list any names,might get kicked off.BTW Calvin just released his new 250R cylinder,which is similiar to the Cheetah's.It has a displacement of 500cc's and has already dynoed over 100hp on Alky from what I've read.Might give our Banshee's some competition.
#4
trinity racing banshee engines
They do,one of my friends has one.It's just alot of people don't like Trinity's customer service.The one my friend has ran 4.4 in 300 ft. at 44mph.He let out in 3rd because his fuel pump isn't on yet and it's sucking the 44mm Lectron Alky carbs dry in 3rd.If you can run a 4.4 at only 44 mph it should go 3's easy with the fuel pump on.I'd talk to K&T,Dan Hull or Buddy Deville.They build some fast **** and are really good to deal with.
#5
trinity racing banshee engines
not sure if i believe that. A motor, i dont care what it is, wont suck a lectron bowl dry after making a 1.5 second WOT pass. Only time you really need a fuel pump is running long straights or up a long hill.
The honda cylinder hasnt hit 90 horse yet on alky. Far away from 100 thus far
The honda cylinder hasnt hit 90 horse yet on alky. Far away from 100 thus far
#6
#7
trinity racing banshee engines
Man I don't know what kinda stuff you've seen run but I've seen it with my own eyes.Most of our stock cylindered 350's run fuel pumps down here to keep from having this same problem. I had heard on planetsand that it'd been over a 100 hp,I could be wrong on that but that's what I read.