Raptor Stock Jetting Specs???
#14
#15
#16
#19
2003 Raptor 660 carb cleaning...
Just removed and cleaned a 2003 Raptor 660 that a friend bought used 3 years ago and it has been sitting more than 3 years with old gas.
I was interested in the stock jet sizes. This one had 160 / 165 for the mains and 22.5 for the pilot jets. The other odd idle jet I didn't record the #'s on it is very very small similar to the pilot jet. Both float needles were stuck and I need carb cleaner and a pliers to remove them. What a chore.... Remove, clean, reinstall took over 6 hrs including repairing previously stripped screws by slotting them with a dremel.
I was interested in the stock jet sizes. This one had 160 / 165 for the mains and 22.5 for the pilot jets. The other odd idle jet I didn't record the #'s on it is very very small similar to the pilot jet. Both float needles were stuck and I need carb cleaner and a pliers to remove them. What a chore.... Remove, clean, reinstall took over 6 hrs including repairing previously stripped screws by slotting them with a dremel.
#20
I'm new to the Forum any help will be appreciated I have an 04 660 Raptor stock except for White Brothers full exhaust it seems to cut out and sputter about 3/4 throttle do I need to change the Jets if so what do they need to be please Help..Help..Help.. cause sometimes you just need Full Throttle LOL