well i got 4000 in my banshee now here are some mods i can think of
1996 yamaha banshee 355
4000 in mods
White bro boost bottle
FmF fatties
FmF power core II's
Wiseco h/c bored .030 over pistions
RTC clutches
K&N air filter
Jets
Boysen power reeds
Dureblue eliminator +2 axle
PRM s/a skid
D.I.D Chain
Graydon Proline Nerfs
Kenda Knarly tires
ITP holeshots front
ITP .190 rims
Aluminum bumper
Chrome grab bar

belive me there is more .. so now i wanna make me an ultimate trail banshee what would u guy suggest doing to it says i got 1000 to work wit

 

I dont know tons about banshees but u should get afetrmarket shocks and maybe a lowering kit all around

 

maybe just slap on 400ex shocks i heard alot of ppl have done that and they shouldnt b much on ebay or sumthing and the lowering kit isnt much

 

i hate a lowering kit .... but i dont wanna make it lower b.c its gotta be higher ffor trails

 

If you want more bottom end get it trail ported, up the compression, and get a 2 into 1 pipe.

 

Get your head shaved, ( the one on your bike) that will bump up your compression for 50 to 75 bucks. Or you could buy a Cool head with some 17cc or 18cc domes for about $250, if you don't mind running 110 octane.. It give the Banshee some nice low end power.. A set of Delta 2 V-force reeds are nice as well, oh but you already have reeds...

 

I was having low end problems with my 370 LR, and had the timing advanced 11°, I was already running Pro Design Cool heads w/17cc domes, re-jetted my carb and now she comes out of hairpin turns in 3rd... I can run the who;le track in 3rd and fourth.... Dude, you need to erase the 4000 in mods becaused it makes you look like you ride the short school bus...

White bro boost bottle<---->TRASH THIS, it does nothing....
FmF fatties
FmF power core II's
Wiseco h/c bored .030 over pistions
RTC clutches
K&N air filter<--->I would go with a Foam Pro Flow for more protection from water, mud, etc....
Jets------------------------Uh, don't thet come with these stock??
Boysen power reeds
Dureblue eliminator +2 axle
PRM s/a skid
D.I.D Chain
Graydon Proline Nerfs
Kenda Knarly tires
ITP holeshots front
ITP .190 rims
Aluminum bumper
Chrome grab bar

 

Yeah sorry to burst your bubble dude, but all my mods total are just above $4000, and I think I might have a little bit more done to mine. [img]i/expressions/face-icon-small-wink.gif[/img]