I am fairly new to this, so bare with me, please. I have installed a K&N filter and filter lid, and also a dyno jet kit, and it runs great..almost too great. I have killer top end, but not enough low end for trails and hill climbing. I have no problem losing some on the top if I can get a little more out of the lower. Does anybody have any suggestions? Thanks!

 

are you kidding? raptor's are one of the torquiest quads out there. they have plenty of low end power. thats why you see stock raptors makin it up huge dune hills

 

you want it to feel tourqy. throw a 12 tooth front sprocket and a 44tooth rear. Thats what i run and its mint with 22" tires with 20" tires the 12 was mint.

 

HERES MY BEST SUGGESTION

AND I WOULD SUGGEST ya do it [img]i/expressions/face-icon-small-smile.gif[/img]
lol


Yeah.. the raptors great and has alot of low end.. but if you want tons of low end heres what ya do


Get a 12 tooth front sproket for about 10 bucks adjust your chain and your good to go..

 

me and one fly replied at the same time..

stock gearing is 13/40...

throwing a 12 tooth front sproket on it makes it simialr to a

13/43 i belive

so if u put a 12 front and a 44 rear.. your looking at .."NO first gear lol" but thats where second comes in..

it wouldnt be no first but it owuld be similar to a 4x4 1st gear. in 4 wheel drive on low . lol

 

Yup. And I LOVE my gearing. If i wanna race i just second gear start. remember i have tallwer tires so im just a lil lower geard than 12/40 but its saweeet. when your rock crawling you can put it in first and crawl or second you can dam near come to a halt and and if ya gas it your off. mind you this is on my bone stock rappy besides gears and tires. maybe i go back to 13 in front after pipe and proflow and stuff but i doubt it. I dont have anyneed for top speed.

 

im on a 12 tooth on the 686 lol

 

White Bros E series slip-on silencer add loads of low end but kills the top end.

I got rid of mine because of this, but you may like it.

 

Hey Masterraptor...what piston are ya using ???

 

Its a Wiseco 102mm.

See the link below:

http://www.wiseco.com/PDFcatalogs/ps04-yamaha.pdf