Raptor Stage II cam instullation
#2
#4
Raptor Stage II cam instullation
You have the stronger springs right? Also don't forget the cam break in...very important to do right! As for jetting, you'll have to richen it up forsure but I don't know how much, I'd say once you have it all ready to rip jet it up one on the main and see how it runs and just go from there with the guess and check.
#5
#6
Raptor Stage II cam instullation
How much of a power gain did the stage 1 give?
My friend has a raptor with a yoshi pipe and no airbox lid. When we would race we would be side by side until 4th gear, then he would pull away. So I just installed cams in my Z, now he is going to get a stage 1 for his raptor. Kind of wondering what to expect. I will also have to help him with the install, anything I should know besides geting a manual.
My friend has a raptor with a yoshi pipe and no airbox lid. When we would race we would be side by side until 4th gear, then he would pull away. So I just installed cams in my Z, now he is going to get a stage 1 for his raptor. Kind of wondering what to expect. I will also have to help him with the install, anything I should know besides geting a manual.
#7
Trending Topics
#8
Raptor Stage II cam instullation
Originally posted by: Dfitz
What about rejetting with the new stage 2? I have the stage 1 in now.
What about rejetting with the new stage 2? I have the stage 1 in now.
Cam break in is crucial, 30 minutes at something like 4500 rpm. I cant remember the exact engine speed, but its in the break in instructions that came with the cam. Bubba has you covered on the grease, dont be afraid to slab a good but reasonable portion on.
#9