I have the Dyno Jet kit and i want to get the jetting just right. My question is what dyno jet size is the equivalent to a mikuni 150 jet? I currently have an E-Series pipe with a 132 Dyno Jet but it seems a little sluggish i was going to change it to the mikuni 150 but I bought the dyno jet for more power but i cant seem to find the right jet for it.

 

http://www.angelfire.com/pa5/cannond...s.dynojet.html

There you go

 

Thank you Velociraptor [img]i/expressions/face-icon-small-happy.gif[/img]

 

No problem, i went through the dynojet hell, keep the faith, you'll get it right eventually.

 

A friend of mine had me jet his warrior. I put in a 150 dyno jet with a FMF pipe, K&N filter and no lid.

 

Am I the only one that thinks that chart is wrong? From my experience a 140 dyno jet flows more fuel than a 140 mikuni. If you dont believe me look at people with pipe raptors. Mikuni guys are running 150/155 and up and DJ guys are using smaller DJ's with similar bikes and conditions.

 

The problem is that I dont want to take the lid of and 150 I already used it it ran too rich very sluggish i cant seem to get a good balance.