Raptor axles
#11
Raptor axles
yeah maybe ill see u at snakehunt it will be my first time too
also raptorboy the same buddy of mine had a leak in the seam on an itp wheel and they 2nd day delivered a new one and he sent the broke one back later
good customer service is great to have and sadly a rarity nowadays
also raptorboy the same buddy of mine had a leak in the seam on an itp wheel and they 2nd day delivered a new one and he sent the broke one back later
good customer service is great to have and sadly a rarity nowadays
#12
Raptor axles
I have an RPM Axle. its been through everything, my plastics and my welded steering stem can tell the story. and teh axle is as straight as teh first day i got it in the mail.
the only complaint i have is that the chrome chips off (from hittting rocks) and starts rusting. [img]i/expressions/face-icon-small-happy.gif[/img]
if you get the axle and use stock wheels hubs add a washer or buy hubs otherwise your gonna have to tighten teh hubs after alil riding, and i dont knwo if its only me but teh LSR aluminum double lock axle nut stripped. i would get the one from RPM that stainless steel.
the only complaint i have is that the chrome chips off (from hittting rocks) and starts rusting. [img]i/expressions/face-icon-small-happy.gif[/img]
if you get the axle and use stock wheels hubs add a washer or buy hubs otherwise your gonna have to tighten teh hubs after alil riding, and i dont knwo if its only me but teh LSR aluminum double lock axle nut stripped. i would get the one from RPM that stainless steel.
#13
Raptor axles
I have had durablue and the axle stunk. I had to pond the hubs on because they were not machined right. I have 2 RPM axels & carriers on two Turbo-Nitros Raptors and found the quality to be really good. My builder has never had a problem with them and says to stay away from the Durablue for the same reason I had problems with them.
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)