what jetting are you running now? and what is your elevation? I can help you with jetting but just need to know current temps, and elevation. V-force is expensive but it is nice, on the other hand i would try boyesen pro series reeds first before all that, have had great success with them. I am sending you a PM

 

do a plug check to see where ur jetting is curretnly at. buy alot of jets and learn how to take ur carb out. also check the top end and grease the steering stem and rear chock linkage bearings

 

what jets do i replace just the main jet untell i get a nice tan plug... were do i grease the steering stem...... and i stock i new top end at the end of last summer

 

replace w/e jets u have to. do plug checks at different throttle positions. the pilot is at 1/4-1/2 throttle, needle clip is 1/2-3/4 throttle and main is 3/4-full. for the steering, ur gonna have to disassemble the whole steering to get to the bearings. it takes a lil time but its good insurance.