well went and cleand the carb on my warrior and just had to play with the air blead whats the right way to ajust it
thanks
shane

 

bump

 

I assume you mean the idle mixture screw on the bottom of the carb just before the intake boot. A good place to start is 2 or 2.5 turns from seated, then warm up the motor, and run it up to speed in 2nd gear, then let it coast in gear, without pulling in the clutch. If it pops or backfires while slowing down, open the idle mix up 1/4 turn at a time until it stops. If it doesn't pop, turn it in until it does, then go back 1/4 turn. That will get you set up for the best idle and throttle response off idle.