How high will a stock Blaster rev in RPM's. I have a FMF Fatty and a Powercore II, and rejetted it. Everything else is stock. How high should it rev?

Thanks

 

I have the same setup as you, dont now the exact rev but it is pretty high, I can rev it up really high in all gears, wind them out pretty much but dont like to.

 

Peak revs on a stock Blaster are only limited by how much fuel/air mixture you can flow thru them.
You will run up into some air-flow problems in the high rpms that will cause the power to fall off.
Using an inductance one-wire tach, my Blaster can
see 9100/9200 rpms easily, but it's not stock.

Flyin' Ryan