YFZ450 Pipe
#12
YFZ450 Pipe
I have not been up to Hungry valley with my YFZ yet. I want to soon! I wouldnt worry about it really, they are more concerned
with spark arrestors, they will check for these upon entrance ususlly. A great time to come in the park is at night, no one at the guard post
but in the morning you better go down and pay for your stay. Sometimes the ranger drives around collecting and inspecting.
I might go down to Yoshi in Chino and buy a different insert (just in case)..
-J
Make sure you mod the carb and take the airbox lid off when you put on this pipe!
with spark arrestors, they will check for these upon entrance ususlly. A great time to come in the park is at night, no one at the guard post
but in the morning you better go down and pay for your stay. Sometimes the ranger drives around collecting and inspecting.
I might go down to Yoshi in Chino and buy a different insert (just in case)..
-J
Make sure you mod the carb and take the airbox lid off when you put on this pipe!
#13
YFZ450 Pipe
ok so jhead if you coudl email me up at Vinny3299@aol.com then we can talk and you can give me the full run down on what ups i need to do to make this pipe run properly and the right way...
#14
YFZ450 Pipe
Just view the details in my profile, its all there..We should always share our information with others
who have YFZ's, it allows us to further enhance and learn whats out there it no $expense$ and or costly reasearch.
you dont need the protec fuel screw by the way I just use it because i can turn it with the carb still attached if need be.
the carb is not hard to take off and work on I can take it off and change the Main Jet, Pilot Jet and Needle, if I have to in less than 15 min and re-mount it...
-Best
J
who have YFZ's, it allows us to further enhance and learn whats out there it no $expense$ and or costly reasearch.
you dont need the protec fuel screw by the way I just use it because i can turn it with the carb still attached if need be.
the carb is not hard to take off and work on I can take it off and change the Main Jet, Pilot Jet and Needle, if I have to in less than 15 min and re-mount it...
-Best
J
#18