raptor money
#11
raptor money
i mainly like to drag race and just ride wheelies and stuff like that, but we do go to a few places with jumps and i want to go to the track every now and then, mainly i just ride threw fields and go to this old oil blow out and jump the ramps there, so your sayin get rid of the T-4 and go with like curtis sparks or somthin? so right now i am planning on getting Full Curtis Sparks Pipe
K&N Pro Design
Jet It
after that do u think i will have enough to buy a lone star axel (is that a good brand) also is changing the axel somthing i need to take in to get dont or could i probly do it myself. thanks for all yalls help.
then when i get some more money do yall think i should get the 686 11:1 and all that stuff, thanks yall are a big help
K&N Pro Design
Jet It
after that do u think i will have enough to buy a lone star axel (is that a good brand) also is changing the axel somthing i need to take in to get dont or could i probly do it myself. thanks for all yalls help.
then when i get some more money do yall think i should get the 686 11:1 and all that stuff, thanks yall are a big help
#12
raptor money
Sure, Sparks will be a great choice for your Raptor. Try Durablue regarding a longer axle, you will need it since you want to jump and do a bit of MX. Yes you will probaly be able to afford all this, except the 686. That could be done later when you get even more money. Good luck!
#13
raptor money
raptorracer16 did you change your rod when you installed your 686?
seibert get the ct pipe, and their K&N set-up should run you around $550, then with your left over dough, port and polish the head by a professional builder $400, sell the t-4 on ebay. and with the money you made purchase a stage one hot cam. well within the goal of $1k and you'll have yourself a raptor making around 55hp. woot.
problem is first time you drag race, your going to be wishing you had a +4 swingarm.
seibert get the ct pipe, and their K&N set-up should run you around $550, then with your left over dough, port and polish the head by a professional builder $400, sell the t-4 on ebay. and with the money you made purchase a stage one hot cam. well within the goal of $1k and you'll have yourself a raptor making around 55hp. woot.
problem is first time you drag race, your going to be wishing you had a +4 swingarm.
#15
raptor money
Originally posted by: CTracingraptor Port and polish the head by a professional builder $400, purchase a stage one hot cam and you'll have yourself a raptor making around 55hp. woot.
problem is first time you drag race, your going to be wishing you had a +4 swingarm.
problem is first time you drag race, your going to be wishing you had a +4 swingarm.
Thread
Thread Starter
Forum
Replies
Last Post
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)