My local yamaha guy called me today and told me that his buddy has been talking about getting a cheeta cub system for his banshee

hes gettin a 58mm stroke (+4mm), 65mm bore and 68mm bore

i dont know much about all what that kit is
but

how will my Craycraft760 stroker match up to it,
question is for anyone who knows anything about cheeta cub products.
http://www.patriotracing.net/Cheetah%20Cub.htm

 

I don't no how you will match up... But your buddy's Banshee will be making around 75-80 hp on gas with that motor...

 

Flat drags or hill shooting?

 

flat drag

 

Whats a 760 Putting down power wise, My 358 Cub puts out 81HP on gas, your freinds will probably be in the 90's. I've only raced a 686 once and it wasn't even close on a hill.

 

have not got it back yet bob and are still waiting for the clutch

 

You can do good in 300 feet but on a 1400 foot hill, make sure you have goggles on.

 

You'd better have your chassis dialed in, those stroker cubs are strong. At the kind of HP you guys are swinging; chassis setup, gearing, tires, and rider ability have more impact than 10-20 HP in 300 feet. If you can get out of the hole faster, the Banshee should have a hard time catching you.

 

Thats funny but true.

 

here is a noobie question. Why do the 2 cylinders have different bores. Shouldnt they be the same.