Yamaha Discussions about Yamaha ATVs.

03 Warrior wont start

Thread Tools
 
Search this Thread
 
Old Oct 22, 2005 | 11:57 PM
  #1  
repeat's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2005
Posts: 9
Likes: 0
Default 03 Warrior wont start

I got a 2003 yamaha warrior...it wont start??? It was flipped and after that it wouldnt start so i clipped the clutch wires ( i think thats what they were) and it started? Ran it for a few days went to fire it again and nothing...... Got terrible spark but got fuel...the coil is good cause we used a new one and still bad spark?? any help would be very appriciated Kyle
 
Reply
Old Oct 23, 2005 | 12:02 AM
  #2  
garrett5462's Avatar
Elite Pro Rider
Joined: Dec 2004
Posts: 5,193
Likes: 0
Default 03 Warrior wont start

have you changed the spark plug and checked for spark? also did you make sure the plug was grounded to the egine when you turned it over to check the spark?
 
Reply
Old Oct 23, 2005 | 12:04 AM
  #3  
repeat's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2005
Posts: 9
Likes: 0
Default 03 Warrior wont start

yep brand new plug and grounded it to the head still terrible spark and wont run????
 
Reply
Old Oct 23, 2005 | 12:07 AM
  #4  
garrett5462's Avatar
Elite Pro Rider
Joined: Dec 2004
Posts: 5,193
Likes: 0
Default 03 Warrior wont start

Originally posted by: repeat
yep brand new plug and grounded it to the head still terrible spark and wont run????
i would check the carb ( clean it) because i have seen oil seep into the carb on friends quads after they flipped them over while riding and they ran like crap for a while and than died.

also check the connections to the coil and the spark plug cap becuase maybe when it was flipped, a wire got pulled causing a bad connection to the spark plug.
 
Reply
Old Oct 23, 2005 | 12:11 AM
  #5  
repeat's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2005
Posts: 9
Likes: 0
Default 03 Warrior wont start

we used a differemt coil off of a friends warrior and we also rebuilt the carb and cleaned it all out
 
Reply
Old Oct 23, 2005 | 12:12 AM
  #6  
garrett5462's Avatar
Elite Pro Rider
Joined: Dec 2004
Posts: 5,193
Likes: 0
Default 03 Warrior wont start

Originally posted by: repeat
we used a differemt coil off of a friends warrior and we also rebuilt the carb and cleaned it all out
so when you used the other coil, the spark was still bad?
 
Reply
Old Oct 23, 2005 | 12:12 AM
  #7  
repeat's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2005
Posts: 9
Likes: 0
Default 03 Warrior wont start

yep
 
Reply
Old Oct 23, 2005 | 12:13 AM
  #8  
garrett5462's Avatar
Elite Pro Rider
Joined: Dec 2004
Posts: 5,193
Likes: 0
Default 03 Warrior wont start

so that means you must have a bad connection anywhere between the plug and the coil.
 
Reply
Old Oct 23, 2005 | 12:14 AM
  #9  
repeat's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2005
Posts: 9
Likes: 0
Default 03 Warrior wont start

we used two differnet coils
 
Reply
Old Oct 23, 2005 | 12:15 AM
  #10  
garrett5462's Avatar
Elite Pro Rider
Joined: Dec 2004
Posts: 5,193
Likes: 0
Default 03 Warrior wont start

Originally posted by: repeat
we used two differnet coils
yes, so if you had a bad spark with both of them, than there must be a bad connection somewhere between teh coil and the spark plug. Or it could be the spark plug cap.
 
Reply



All times are GMT -5. The time now is 01:46 AM.