next blaster mods
#1
next blaster mods
I now have rear tires and rims, and handlebars (see below). So far I have no regrets. I am know looking for some new parts. I want my bike mostly stock, because i hope to get a banshee frame and build a banshee. I want to get a full pipe system, and front and rear shock, tusk nerf bars and some wheel spacers and maybe a longer swingarm and axle. I am looking at the toomey b1 pipe kit, and a lrd pipe, I am not planning on porting so i think i will get the toomey. I might buy a 400ex rear shock and banshee front shocks, but everybody says you have to do a little modifications to get them on. WHAT ARE THE MODS? I wanted like 5in. wheel spacers for the front and back. I am hoping not to spend over $650. Thanks for any help, which will be greatly appreciated.
#3
next blaster mods
You have to cut the air box to get the 400 shock on. Theres no modding to do to put the Banshee front shocks on. The LRD is considered by most to be the best pipe. The toomey is considered to be a top end pipe.
You might try some of the Blaster only sites for more info.
Like: Project Blaster
Blaster zone
PlanetBlaster
This site is good, by those deal ONLY with Blasters and you can find a bunch of usefull info there.
You might try some of the Blaster only sites for more info.
Like: Project Blaster
Blaster zone
PlanetBlaster
This site is good, by those deal ONLY with Blasters and you can find a bunch of usefull info there.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
09-23-2015 06:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)