I'm wanting to convert my banshee over to alcohol, I was talking to a buddy and he told me that this was the place to get the information. What all do I have to do? I'm running 34mm mikuni flatslide carbs.

 

Planetsand.com is where the more serious banshee builders hang. I would go there.

 

First off you will need to have those carb's modified. Your carbs will need power jets installed, along with a dump tube and custom needles and jets. You can send your carbs to an engine builder, and they will set them up for you. And unless you know someone familiar with alky, then this might be the way to go. I buy all my alcohol carbs form Lynn Chauvie, at L.C. performance. You can call him up, tell him your motor specs and elevation. Ship him your carbs then he will modifiy and jet them accordingly.

 

PM me and I will tell you how to do it yourself if you want. It is not hard but does require some skill and a special drill or reamer size bit.
By the way, if you do not have a pingle petcock then start there for sure.