yfz 450 creeps forward ???
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
After I warm up my yfz450 I pull the cluch in all the way and shift into first I moves forward like the clutch wasnt pulled in. Then it stops after doing it a couple of times. Can some one tell me how to fix it. It only dose it when I start it up for the first time of the day and then gose away until the next day I go to start it.
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Are you using the right oil? Other than that I don't know, sometimes the clutch plates just stick after it sits. Just press the rear break before you put it into gear. It's probably nothing with the adjustment if it goes away after the first time you start it.
My warrior does the same thing to me sometimes. It makes me look like an idiot, because I warm it up in my shed, then when I put it in gear it slams into the back wall of the shed and knocks all my bottles and parts off the shelf onto the quad and floor.
My warrior does the same thing to me sometimes. It makes me look like an idiot, because I warm it up in my shed, then when I put it in gear it slams into the back wall of the shed and knocks all my bottles and parts off the shelf onto the quad and floor.
#6
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
My 06 450 does that as well. With the brake on and cluth in, the first start up will jump forward, after the first start up, it doesnt do it again. Im guessing something is just sticking until it gets a little use. I only ride mine on weekends, so all week it has time to stick. Hopefully thats all it is!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)