396Raptor vs. z400
#11
#12
396Raptor vs. z400
My Raptor is geared up 2 teeth on the front and was close to the top end of a stock Z. It wasnt even wound out all the way unless I was going down hill and a z could barely pass me. I could push 65mph stock with +2 sprocket on the front. 660Rryder's Z had 18 inch tires(I have 20s), high compression piston, and cams with stock sprocket, but could BARELY pass me on the level on blacktop. The Z I am going to race is even geared up a tooth and piped(full system). It is even with 660Rryders Z. When they race, they are even. They switch winning almoste every time. I also dont want any BULL about this not being true because ther were alot of people there to back me up about it happening.
#13
#14
396Raptor vs. z400
Well the road we race on is different on each lane... On one side i tear him up, on the other he gets the jump on me and i play catch up... Top speed is about the same... I think i have just alittle on him though... Another problem i have is exessive spinning even with raz'r 2's... POWER.lol. I am gonna gear it up a tooth, so i can take off without spinning... Right now i can take off in 3rd gear with a small slip of the clutch... I don't know why i can't tear up the piped z he is talking about when i am on the wrong side of the road... Like i said it is just traction... On 300' i can take yfzrydermaces 700 raptor, with a full system pipe... But like i said it is all a matter of traction where we race... Peace...
#15
396Raptor vs. z400
I could push 65mph stock
#20