running a banshee air cooled?
#1
running a banshee air cooled?
hello. i am building a drag bike and would like to use a banshee motor. would it be safe to completely remove the coolign system? the bike will be ran to warm it up.. (say a minute), a burn out (15 seconds), and a run (15 seconds) so a minute and a half of air cooling mayhem...is it safe or i will i blow her sky high? thanks!
#2
running a banshee air cooled?
I would say that you could loop the cooling system; but not run it dry. In other words fill the block with water and connect the two radiator hoses together.
I'd burn you down on the line if I saw you doing this. [img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img]
I'd burn you down on the line if I saw you doing this. [img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)