raptor 660 starting/idle issues
#11
raptor 660 starting/idle issues
haha, ok update, did the valves, again, first thing that was off was the gap, i had gapped the intake at .13 , well all the valves were off my almost a 1/4 inch! and the thing had only been ridden for 5 minutes! .. so anyway i redid the valves again, this time intake is at .10 and exhaust .15.. that compression issue is gone, don't ask how, but it cranks over just fine, started up right off the bat too.. i was so happy! my high idles's taken care of, that was my own stupidity, but i guess here's my new question.. how loud are the valves supposed to be? because there is quite a bit of chatter goin on... but it runs and starts right up on it's own!
#12
raptor 660 starting/idle issues
Well im glad to see you got her fixed....[img]i/expressions/face-icon-small-smile.gif[/img]
If you have any kind of after market cam.. it will rattle in there...But if you have a stocker..and you got the valves set right.. you sould not have nuttin to worrie about...[img]i/expressions/face-icon-small-wink.gif[/img]
If you have any kind of after market cam.. it will rattle in there...But if you have a stocker..and you got the valves set right.. you sould not have nuttin to worrie about...[img]i/expressions/face-icon-small-wink.gif[/img]
#13
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)