warrior noise please help
#1
#2
warrior noise please help
Did you check the condition of your front sprocket? I don't know how people overlook this as often as they do, but if the sprockets go too long without being replaced the teeth will break off, and cause the chain to slip over them. I never heard axle bearings make popping noises, or any other kind of bearings for that matter. Sometimes the swingarm bearings will make a creaking sound when they wear out, but they have to get really bad to do that. Actually, that noise is caused when the bearings are completely gone, and the swingarm is just riding on the pivot with nothing in between.
#3
#4
warrior noise please help
Jack your quad up and see if the swingarm or axle wiggle at all. If they do, you blew a bearing. My quad was making the same noise yours was, and it was because of a blew axle bearing. I let it go to long and the bearing wore away at the axle carrier. It makes that popping noise because the chain isnt riding on the sprokets flush because the axle can wiggle back and forth. Also, because I let that bearing go to long, I blew the swingarm bearing beacause of the extra wear and tear. later.
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Polaris
18
04-23-2016 07:36 PM
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)