660 Grizzly carb help.
#1
660 Grizzly carb help.
On a 2005 660 we have confermed that the carbrator is getting fuel from the fuel tank by removing the fuel line. The engine will run on starting fluid. I taped the carb lightly to free up the floats if that was the problem.
So...is their something else that could be wrong that, I can look at before I remove the carb?
Thanx for any advice!
So...is their something else that could be wrong that, I can look at before I remove the carb?
Thanx for any advice!
#2
#5
660 Grizzly carb help.
Yup the whole carb was removed. I was looking for simple stupid, crazy issues first before I tore the whole thing down.
Anyway....The true owner of the Grizzly is in the ARMY. He can't ride it much anymore so my brother is in whe works of maby buying it. It has very little hours and miles on it. So from it sitting for months at a time without it being started water seized the float valve. So its fixed and running now.
ANOTHER THING!!!!
When I removed all of the plastic, the gas tank, ect, ect....Their is a rubber hose that seems to be a vent for something. The host has a "T" or a "Y". I believe it goes through the white plastic shield under the tank and hooks to something. Can anyone help me out here?
Anyway....The true owner of the Grizzly is in the ARMY. He can't ride it much anymore so my brother is in whe works of maby buying it. It has very little hours and miles on it. So from it sitting for months at a time without it being started water seized the float valve. So its fixed and running now.
ANOTHER THING!!!!
When I removed all of the plastic, the gas tank, ect, ect....Their is a rubber hose that seems to be a vent for something. The host has a "T" or a "Y". I believe it goes through the white plastic shield under the tank and hooks to something. Can anyone help me out here?
#7
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)