I have an 02 banshee that doesnt start. I have a brand new stator and cdi box in it. I had it at a yamaha service center and the did stuff to the carbs. The plugs are fine and any fuses i can find look ok. Im 15 yrs old and my parents wont pay for nething i have payed for all of it by myself so what do u think i should do.

 

I would check your wiring, and check your kill switch and key switch as well as the key, other wise well your are strating it try giving it a little gas. What exactly did they do to the carbs?

 

the said i neede neddle valve assemble so that all the did and cleaned them

the gas thing doesnt work because there is no spark at all i took the plugs out and grounded them and there was no spark so idk

 

the check to see if anything is loose wiring wise and make sure you have a ground...check the killswitch and key switch if you have a multimeter test for ohms or resistance on these things try disconnecting the 3 yellow wires that go from the rectifier to the stator and try cranking it over again if it works then you have a problem with the stator eithe not being assembled correctly or something

 

Take the tors off if its not already.