good premix ratio for blaster (amsoil)
#13
#14
good premix ratio for blaster (amsoil)
Did you use alot of oil on the cylinder walls and wrist pin and bearings when you put it together? All the excess oil may still be in the crankcase. Last week didn't you mixed the oil wrong. Maybe all that extra oil is still in the crankcase. Also didn't you have a problem with it not starting, was it the sparkplug.
#15
good premix ratio for blaster (amsoil)
You have to rejet for aftermarket exhaust and air filter. You have to get more fuel in to account for the extra air coming in from a better exhaust and air filter. For the detonation either to low of octane fuel was used, too hot of spark plug, or ignition was advanced too much. I would ride it some and take the spark out and see how it looks.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
04-09-2020 11:19 AM
ATVC Correspondent
Technical and How-To Articles
0
07-02-2015 01:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)