I HAVE A 01 WARRIOR THAT I HAVE REPLACED THE CDI SATOR REGULATOR COIL AND PLUG BUT I CANNOT GET IT TO FIRE WHAT IS GOING ON HERE THE ONLY THING TAHT I CAN THINK OF ARE THE TWO RELAYS IF ANY ONE CAN HELP PLEASE DO

 

check all your hookups.. make sure they are all tight connections and in the right places... also.. please don't use all caps

 

checked everything all thight

 

are you getting spark?

 

no spark at all

 

hhmm y did u replace all the electrical in the first palce.. i am just curious

 

will it started when my bat exploded but it would jump start few times and i just figured no spark something electrical

 

i'd see if there is power getting to the coil

 

If all the electrical components are good, that only would leave the wiring in between. Get a wiring diagram and a multimeter, and start checking for continuity and shorts in the harness. The most common location for wiring damage seems to be at the rear, where the harness rubs against the subframe. The harness flexes there, and also usually rubs against the frame and wears through the insulation or breaks wires.

 

would the relays have anyt thing to do with it