Yamaha Discussions about Yamaha ATVs.

dumb ?

Thread Tools
 
Search this Thread
 
  #1  
Old 02-07-2007, 03:06 PM
Raptor660JC's Avatar
Trailblazer
Thread Starter
Join Date: Jan 2007
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Default dumb ?

This is probably a dumb question but this is my first quad..

I need to add brake fluid, do you just remove the top of the master cylinder and add it?
 
  #2  
Old 02-07-2007, 03:21 PM
Speedy2222's Avatar
Elite Pro Rider
Is A Power Sport Junkie!
Join Date: Jul 2003
Location: Indiana
Posts: 5,400
Likes: 0
Received 0 Likes on 0 Posts
Default dumb ?

what quad is it?? whereever u are checking level is where u add it
 
  #3  
Old 02-07-2007, 03:37 PM
Raptor660JC's Avatar
Trailblazer
Thread Starter
Join Date: Jan 2007
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Default dumb ?

Its a raptor 660.

So just pop off the top of the master sitting on the handlebars and add fluid?
 
  #4  
Old 02-07-2007, 03:40 PM
Speedy2222's Avatar
Elite Pro Rider
Is A Power Sport Junkie!
Join Date: Jul 2003
Location: Indiana
Posts: 5,400
Likes: 0
Received 0 Likes on 0 Posts
Default dumb ?

yea.. take the 2 allen bolts out and put DOT 4 fluid in there.. you can add DOT 3 but i wouldn't recommend it.. DOT 4 holds up against heat better
 
  #5  
Old 02-07-2007, 04:02 PM
deanz400's Avatar
Pro Rider
Join Date: Feb 2004
Posts: 1,981
Likes: 0
Received 2 Likes on 2 Posts
Default dumb ?


If your master cylender is low check your brake pads you may need new ones , where do you think the fluid went ,to fill your calipers on your breaks,
 
  #6  
Old 02-07-2007, 04:17 PM
Raptor660JC's Avatar
Trailblazer
Thread Starter
Join Date: Jan 2007
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Default dumb ?

Great, thanks for all the info!
 
  #7  
Old 02-07-2007, 04:53 PM
bombrider04's Avatar
Pro Rider
Join Date: May 2006
Posts: 2,060
Likes: 0
Received 0 Likes on 0 Posts
Default dumb ?

where at in jersey do you live?
 
  #8  
Old 02-08-2007, 01:27 PM
deanz400's Avatar
Pro Rider
Join Date: Feb 2004
Posts: 1,981
Likes: 0
Received 2 Likes on 2 Posts
Default dumb ?



If your break pads are worn out then get new ones on your machine before you fill the master cylinder , then top it off after the new pads are in .
 
  #9  
Old 02-08-2007, 10:20 PM
Raptor660JC's Avatar
Trailblazer
Thread Starter
Join Date: Jan 2007
Posts: 87
Likes: 0
Received 0 Likes on 0 Posts
Default dumb ?

great..thanks alot!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tycobb
ATC 3-Wheelers
3
10-23-2015 07:37 PM
brokemybanshee
Arctic Cat
2
05-01-2001 12:04 AM
RaptorRules
Yamaha
2
11-08-2000 04:58 PM
SWAC
Polaris
15
02-17-2000 03:04 PM
Rocky
Performance Mods and Project Quads
1
01-06-2000 05:04 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: dumb ?



All times are GMT -5. The time now is 05:49 PM.