Yamaha Discussions about Yamaha ATVs.

help me please

Thread Tools
 
Search this Thread
 
  #1  
Old 05-01-2007, 06:15 PM
runaway's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2007
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

hello
my 87 moto 4 80cc wont start cold unless u push it, it will start with the electrc start after its warm please help the dealers in my town are jerks and wont help unless i pay them.
 
  #2  
Old 05-01-2007, 08:48 PM
Yamahariders3's Avatar
Weekend Warrior
Join Date: Dec 2006
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

HI. You're problem may be your battery. It starts when it's warm because it's being charged. Try checking the voltage , it should be 13.5 If you can't check it, try taking it to somewhere like Autozone, they'll check it for free. Good luck!!!
 
  #3  
Old 05-01-2007, 10:51 PM
runaway's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2007
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

hello thanks for answering it has a new battery in it,and sometimes it spits gas out the back of the carb could that have any thing to do with it?
 
  #4  
Old 05-01-2007, 11:37 PM
recon99's Avatar
Extreme Pro Rider
Join Date: Aug 2004
Posts: 2,908
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

Could need a valve adjustment, maybe the valves reseated if they're worn, or it could be running too lean. I'm betting on it just needing the valves adjusted.
 
  #5  
Old 05-02-2007, 12:20 AM
runaway's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2007
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

hello
well recon doubles his bet!!! it was the valves well the intake it had zeroed out had to reset it. the setting are intake .005 to .010 exhaust .125 forgot the other half if i remember i will post it . thanks to the forum members who helped hope i can help u someday.
 
  #6  
Old 05-02-2007, 12:28 AM
recon99's Avatar
Extreme Pro Rider
Join Date: Aug 2004
Posts: 2,908
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

Wow, that was quick. Good to hear that you got it sorted out already.
 
  #7  
Old 05-02-2007, 02:17 AM
ctateusa1's Avatar
Pro Rider
Join Date: Nov 2006
Posts: 1,697
Likes: 0
Received 1 Like on 1 Post
Default help me please

glad to hear you got it fixed. at least the intake valve hasnt beaten its way into the head yet. It will do the same as mine sooner or later, no compression and no start. The intake valve will be sucked up into the head and will need to be replaced.
 
  #8  
Old 05-02-2007, 11:36 AM
runaway's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2007
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

hello
ya i realize that it will need to be replaced sooner or later but later is always better than sooner.for now it runs like a champ
 
  #9  
Old 05-02-2007, 12:59 PM
ctateusa1's Avatar
Pro Rider
Join Date: Nov 2006
Posts: 1,697
Likes: 0
Received 1 Like on 1 Post
Default help me please

You aint kidding there, I just spent about 200.00 totally rebuilding the engine and having it bored over.25
 
  #10  
Old 05-02-2007, 02:52 PM
runaway's Avatar
Weekend Warrior
Thread Starter
Join Date: May 2007
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default help me please

hello
was it due to the valve damage or did u figure while im here i will replace other parts?
 



All times are GMT -5. The time now is 06:18 PM.