REBUILT BANSHEE WILL ONLY IDLE
#1
REBUILT BANSHEE WILL ONLY IDLE
DOES ANYONE KNOW ABOUT THE TORS SYSTEM ON A BANSHEE?? MY BANSHEE I BOUGHT WAS WORE OUT SO IREBUILT THE MOTOR AND EVERY NUT AND BOLT,BUT WHEN I START IT,IT WILL ONLY IDLE,STALLS WHEN GIVING IT ANY GAS.WHEN I WIGGLE THE THROTTLE SWITCH UNDER THE THROTTLE COVER IT IDLES A LITTLE HIGHER BUT STILL CANT GAS IT.IT RAN ROUGH BEFORE I TORE IT APART BUT YOU COULD RIDE IT EVERYDAY. SOMONE TOLD ME OF A BYPASS KIT FOR THIS SYSTEM??ANY HELP WOULD BE GREAT,THANKS
#2
#3
#4
REBUILT BANSHEE WILL ONLY IDLE
I found some notes on the blaster tors bypass that somebody posted on here a while back. They said to just cut the wire leading to the top of the carb. and to cut the wire leading to the switch. I'm not sure if there's one wire or to on both of those. I'd guess to say that there's two if they're switches though. If that's the case you might have to twist them together and try that.
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)