mikuni carb jetting..
#1
#3
mikuni carb jetting..
Nothing but the Yamaha manual [img]i/expressions/face-icon-small-sad.gif[/img] ..I don't know if I will get instructions from HMF,It was one of ebay deals where I get the black pipe,spark arrestor,jets and quiet core..
the part that worys me its taking off that float to get at that jet..I broke one before trying to get one off..There are plenty of guides out there for the Keihin and Edelbrock,but nothing for the Mikuni..Well I hoope it comes with instructions,but I'm not holding my breath lol ..
the part that worys me its taking off that float to get at that jet..I broke one before trying to get one off..There are plenty of guides out there for the Keihin and Edelbrock,but nothing for the Mikuni..Well I hoope it comes with instructions,but I'm not holding my breath lol ..
#4
mikuni carb jetting..
i have a set of instructions. Here they are:
1. Remove top carb plate. Remove slide lift arm screw and the two needle plate screws. Flip the linkage forward and remove the slide.
2. Install needle (what ever is specified for your jet kit) on the correct groove.
make sure you put the e-clip on.
3 Install correct jet. reassemble.
really not that bad
1. Remove top carb plate. Remove slide lift arm screw and the two needle plate screws. Flip the linkage forward and remove the slide.
2. Install needle (what ever is specified for your jet kit) on the correct groove.
make sure you put the e-clip on.
3 Install correct jet. reassemble.
really not that bad
#5
#7