Does any one know of a peg riser that is for the Grizzly 700. The floor board pegs are to flat for me. To push the foot brake I have to lift my foot off of the floor board and on the hills it is a pain and throws off your balance and stance. I saw one in a picture, it was a black piece of plastic that went in between the stock peg and floor. It just had bolts that went all the way through. If anyone can help me thanks in advance.

 

Is this what you are looking for?.

http://cgi.ebay.com/ebaymotors...?hash=item200212594602

 

Not really, what I want would go inbetween the floor board and the metal peg like what you showed. It would raise that peg up about 1-2 inches. It would then just have two bolts that go straight through to the bottom. Thanks again.

 

For what you are wanting to do... quite simple riser... it is called Wood [img]i/expressions/face-icon-small-smile.gif[/img]

You honeslty don't need much more than a piece of oak or any other hardwood... very cheap and if you can handle a saw and a drill you are good [img]i/expressions/face-icon-small-smile.gif[/img]

 

I saw a guy selling stainless extended footpegs over at atvtorture.com. They looked real nice.