Banshee VS Raptor!
#33
i've replaced and repaired:crank, piston, bored out, stator, swingarm, front shocks, wiring, clucth, sidecase, brakes, lots of bearings, transmission bearings, all cables, throttle, air filter, muffler.....it doesn't have reliability problems now.......it DID have a bunch of old parts...but ANY 14 year old quad thats been put thru hell is gonna have its problems
#34
I was at the Reedsport dunes in Oregon almost a month ago, and these are the experiences that I had (my '01 Raptor vs. a friend's '99 Banshee). The only mods that he had were Holeshot XC rear tires (22x11x9). The only mods that I had at the time were GYT-R skids, handlebars, and clutch perch- like those do anything in drags...).
From a dead start, I would pull him all the way to fifth gear. From a rolling first gear start, I would still pull him. This was in dry, loose sand, with the temp in the low 70s, sunny day, with a slight ocean breeze and some sea gulls over head. I am not sure if the sea gulls were a factor, but they could have been...
From a dead start, I would pull him all the way to fifth gear. From a rolling first gear start, I would still pull him. This was in dry, loose sand, with the temp in the low 70s, sunny day, with a slight ocean breeze and some sea gulls over head. I am not sure if the sea gulls were a factor, but they could have been...
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
Sep 13, 2015 12:30 AM
Alex Rodak
Yamaha
0
Sep 12, 2015 09:39 AM
Alex Rodak
Introduce Yourself
0
Sep 11, 2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




