Warrior Jetting?? With Pipe and Filter Kit
#1
05-02-2008, 05:06 PM
Join Date: May 2008
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Warrior Jetting?? With Pipe and Filter Kit
I recently bought a Pro circuit T-4 slip on, and a pro design k&n filter kit and a Dyno Jetkit for my '03 Warrior, I havn't installed any of it yet because I was wondering how I should jet my carb and if any adjustment is needed on the carbs fuel/air mixture screw. Any suggestions????
Thanks
Thanks
#2
05-02-2008, 05:22 PM
Weekend Warrior
Join Date: Apr 2008
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Warrior Jetting?? With Pipe and Filter Kit
With my '03, I just installed an HMF slip-on, K&N filter and Outerwear. I first cleaned the carb, set the jetting to 152 (came from HMF), removed the air box snorkel (as well as drilled a few holes in the airbox lid) and turned the air/fuel screw out 3 turns. This seems good for my set up and should give you a decent starting point.
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
12-07-2015 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)