Yamaha Discussions about Yamaha ATVs.

please help ! with 1999 yamaha 350 big bear

Thread Tools
 
Search this Thread
 
Old Jul 10, 2008 | 10:02 PM
  #1  
warhorse20000's Avatar
Thread Starter
|
Trailblazer
Joined: Jul 2008
Posts: 65
Likes: 0
Default please help ! with 1999 yamaha 350 big bear

Hello , I had Recently Bought a 1999 yamaha Bigbear 4x4 atv and it had Noise Comming from the rear end, So i started to take it apart , And I found out was the Barrings , now it took me over a month to get them now i forgot Where go`s what and I need to find a Diagram of the Rear End Differential , (rear end). to put it back together.

can any 1 please help , as im stuck :\

thx
chris
 
Reply
Old Jul 11, 2008 | 12:39 AM
  #2  
warhorse20000's Avatar
Thread Starter
|
Trailblazer
Joined: Jul 2008
Posts: 65
Likes: 0
Default please help ! with 1999 yamaha 350 big bear

humm found it , thx neway

:
http://fiche.ronayers.com/Inde...554/Group/DRIVE_SHAFT_
 
Reply
Old Jul 16, 2008 | 04:59 PM
  #3  
cadillacdude1975's Avatar
Pro Rider
Joined: Jun 2008
Posts: 417
Likes: 0
From: Chattanooga, TN
Default please help ! with 1999 yamaha 350 big bear

bikebandit.com has service manuals too. i have the exact atv. wait till you have to replac the front U Joints in the driveshaft LOL i just pulled that feat off lastnight.
 
Reply
Old Jul 16, 2008 | 11:04 PM
  #4  
warhorse20000's Avatar
Thread Starter
|
Trailblazer
Joined: Jul 2008
Posts: 65
Likes: 0
Default please help ! with 1999 yamaha 350 big bear

ohh no ..

well ill tell you ! this bike i should have bought a better one and new..

im getting a new experiance in this bike and i have not even driven it 1 mile [img]i/expressions/face-icon-small-sad.gif[/img]

I paid $800 for the Bike Used From my Loving Uncle , After his 10 Year old Kid Had His use with it and The Rear End had its Problems.

So far I have Replaced All the Bearings & Seals In the Rear End.For$218.60

I jUst Bought and Replaced the Rear Axle at a Small price of $742.76 after taxes
I also had to replace the Crown Gear in the Rear end wich i got a steal on of a Wopping $411.93 [img]i/expressions/face-icon-small-sad.gif[/img]

Now Im into The Front End :[

Them U Joints Im yet to Figure out how to change , and All the Wheel Barrings are also Done in the Front End. tires are up but treadless..

So Buy the Time & Money im putting in this Bike , it Would probly be cheaper to Scrap this one , and Buy a Brand new 2008 Bike .
[img]i/expressions/face-icon-small-sad.gif[/img]

the brakes are also dead pads and shoes are completely missing. so i gota yet get them as well.
And after i replace all that stuff i hope not to have to replace more.

So heres so far what i got into the bike not counting brakes and stuff it may need yet :

$2173.29
and so far 9 hours labour ..

Dose any 1 think i got a raw deal ? at least it seems to run good.

being its a 1999 ymf350fwbl , bigbear 350 4x4
 
Reply
Old Jul 17, 2008 | 01:31 AM
  #5  
91Warrior357's Avatar
Pro Rider
Joined: May 2008
Posts: 1,860
Likes: 0
From: Purcellville.
Default please help ! with 1999 yamaha 350 big bear

shoo weee, and they dont have much resale value either
 
Reply
Old Jul 17, 2008 | 07:35 AM
  #6  
cadillacdude1975's Avatar
Pro Rider
Joined: Jun 2008
Posts: 417
Likes: 0
From: Chattanooga, TN
Default please help ! with 1999 yamaha 350 big bear

around here where i live at, the going rate for a good used woods/trail ready 4 wheel drive ATV is 2500 bucks. the brakes are 45 bucks for the front and rear
 
Reply
Old Jul 17, 2008 | 10:53 AM
  #7  
warhorse20000's Avatar
Thread Starter
|
Trailblazer
Joined: Jul 2008
Posts: 65
Likes: 0
Default please help ! with 1999 yamaha 350 big bear

only other bike i got is a honda 3 wheeler 1985 250sx with reverse , , as far as the bike itself you cant kill it! but i cant keep tires on it eaither , needs rims , and not even deniskirk carries them anymore [img]i/expressions/face-icon-small-sad.gif[/img]

thats why i have bought this , and talk about a nightmare!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ean
Yamaha
10
Dec 19, 2022 08:48 AM
STLyamwar
Classifieds, Garage Sale & Swap Shop
1
Jul 25, 2020 04:44 AM
Ean
Drivetrain, Suspension & Tires
7
Aug 28, 2015 09:39 AM
kdg723
Polaris
5
Jul 25, 2015 01:20 PM
Peter_
Yamaha
2
Jul 18, 2015 07:06 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:32 PM.