i need help with testing a stator from a 97 warrior my manual does not show how to or what ohms for this one it has three connectors one with three whites I got these all right but the next two I need info both have two wires each one is a green and I think it is a brown to the coil on the stator? and the other one has a red and a yellow I think it is yellow. to the pulse coil ? I haven't found a wire diagram to match this combo. or how to test the ohms .the yellow and brown wires are hard to be sure of the color years of dirt and oil thanks Jerry

 

try this link for online manuals. it helped me a great deal when i had a very similar issue with my nephews 2001 warrior and the best part is they are FREE. http://manuals.dqt.be/index.ph..._remository&Itemid=36?
good luck !!

 

thanks

 

does your bike put out no spark on start but then starts when u skid start it? if so its your stator, they get weak and dont put out enough power to tell the ign. coil to fire, but when u skid start it turns faster and lets it put out enough power to fire, its rare for a cdi to go bad