Parking Brake Block Off?
#1
#2
#3
The main reason I removed this tthing was because I had received a really bad gash in my forearm from the sharp edged lever when I took a hard hit when riding, nearly going over the bars. My forearm hit this lever, so I just removed the entire system, cable and all, keeping the original perch & clutch lever. It did not make the pull any easier as far as I could tell. The Warrior just has a stiff clutch. On my new Raptor, the pull is way easier in spite of using the same parking brake system.
#4
If your parkbrake was rubbing then your bike will roll easier once you take it off the bike, There is a supposed heat dissipation increase to the new plate, Your park-brake rev limiter will be disabled, and your bike will be around 1/2 lbs lighter... I removed mine because it was always needing adjusting and I never really used it. I didnt bother purchasing a new plate though, just pulled everything off and filled the hole in the brake caliper with silicone.
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)