i dont know how to fix my worrior. Heres what happened,I was riding and it stalled, i started it again and it would run as long as i didnt give it and gas. so i was inspecting it and the carburator intake boot was craked. i thought when i was giving it gas it was getting to much air because of the boot . so i replaced it and now when it doesn't start unless i put my hand over the air intake on the carb . even then it runs a full rev and im nit giveing it gas.

 

might still have a vacuum leak or the carb needs to be thoroughly cleaned

 

i cleaned the carb still didnt work then someone else told me to clean it so i did it a 2nd time still didnt work.

 

Check to make sure your throttle cable is not hanging up , or make sure you put the slide in the right direction.

 

i'm gonna bet that when it stalled, it stalled because the parking brake lever came loose and the computer thought it was "on".....if thats the case you pulled your carb apart for nothing and that may still need to be messed with, also where's your choke at? if its pulled "out" that may be a problem as well, i doubt its running "full out"....if it is then the engine is about to destroy itself