Yamaha Discussions about Yamaha ATVs.

2001 banshee kick start locked up!!

Thread Tools
 
Search this Thread
 
Old Dec 3, 2011 | 12:36 PM
  #1  
ray10147's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 2011
Posts: 4
Likes: 0
Unhappy 2001 banshee kick start locked up!!

i had my 2001 banshee out warming it up and it sounded fine, after about 5 minutes it shut off. i went to kick it again and it wouldn't go on i kicked it about 5 more times then it locked up. anyone have any suggestions would be really helpful!! thank you!
 
Reply
Old Dec 3, 2011 | 04:40 PM
  #2  
87yamabanshee's Avatar
Weekend Warrior
Joined: Dec 2011
Posts: 2
Likes: 0
Default

the same thing just happened to mine!!!
 
Reply
Old Dec 3, 2011 | 04:59 PM
  #3  
ray10147's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 2011
Posts: 4
Likes: 0
Unhappy

its pretty stressful cause i was supposed to go to the lost trails in p.a tomorrow!
 
Reply
Old Dec 3, 2011 | 09:58 PM
  #4  
Raptor450's Avatar
Pro Rider
I ride, because football, basketball, and baseball only uses one ball!
Joined: Dec 2006
Posts: 2,407
Likes: 0
Default

Hate to say this but everytime that happened to me the engine was blown up - could be just the topend or the crank bearings could have seized up. Usually if the crank bearings go out the pistons scar the cylinder walls, too, in my experiences. Never had a Banshee but I have owned plenty of 2 strokes and alot of my buddies have had Banshees. Probably need to pull the cylinders off to see what is going on. Good luck.
 
Reply
Old Dec 3, 2011 | 10:06 PM
  #5  
ray10147's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 2011
Posts: 4
Likes: 0
Default

thanks for the info!!
 
Reply
Old Dec 4, 2011 | 01:53 AM
  #6  
87yamabanshee's Avatar
Weekend Warrior
Joined: Dec 2011
Posts: 2
Likes: 0
Default

i just took mine apart and what happened is the circlip that holds one of the gears in place....came off and got jammed in the gears my pistons are still ok! i would drain the oil and coolant, then take off the right engine cover and check to see if anything in there is broken first!
 
Reply
Old Dec 4, 2011 | 05:24 PM
  #7  
ray10147's Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 2011
Posts: 4
Likes: 0
Cool

just messed with the banshee a little tried putting some weight and moving it and it started kicking again!! it didnt go on but ill wait and see maybe its flooded!
 
Reply
Old Dec 17, 2011 | 12:23 PM
  #8  
roystoys's Avatar
Weekend Warrior
Joined: Nov 2009
Posts: 3
Likes: 0
Default

Had on hydraulic once from debris sticking one of the carb floats.
 
Reply
Old Mar 12, 2014 | 12:18 PM
  #9  
bebob33's Avatar
Weekend Warrior
Joined: Mar 2014
Posts: 1
Likes: 0
From: Bridgeport AL
Default

Mine did the same if it is lock up how to get it off if it's the positions?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alix
Chinese Quads
6
Jun 28, 2015 03:28 AM
02Chevrolet
1) Engine problems..
2
Jun 23, 2015 12:12 AM
Dabears1983
Performance Mods and Project Quads
2
Jun 16, 2015 12:17 PM
rking85
Buying an ATV
5
May 20, 2000 11:01 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:41 PM.