I noticed the carb intake boot was cracked. I tried using elctrical tape for a cheap fix for.now.but that didnt work. Anyone know of any other ways to fix it or have one laying around they want to get rid of?

 

You should be able to find them on ebay. If it just has a couple noticeable cracks, then I would take some black RTV gasket maker and smear it in and over the cracks. Make sure you cover them good. Let it sit for 24 hours or so and it should seal up pretty well. Dont know how long it will last or how pretty it will be, but it should work.

 

Hey Man, You Might Want To Try Some Clear Silicone Caulk As A Temporary Fix. As Long As The Crack Isn't Too Big. Just Let It Cure A Full 12 Hours, Before You Go For A Putt. So It Wont Get Sucked In, Under Heavy Acceleration. It Worked For Me On My Bike For A Quick Temporary Fix Until I Found another One.

Good Luck Bro.............